New Winches for Madsu

As I blogged about last year, I picked up 2 new Andersen winches for Madsu, and they’ve been in their nice boxes since I bought them at Steveston Marine.

I spent most of this afternoon removing the old Lewmar winches and jam cleats from Madsu’s cockpit coaming. The Lewmars were attached with 4 bolts, and I was by myself so it was a bit of challenge.

20080321_coaming.jpg

Getting the bolts out meant having to crawl into the cockpit lockers to clamp a pair of locking pliers to the nut, jam it up against the hull, then back up into the cockpit to unscrew the bolt until the nut dropped off.

Its not exactly roomy in there so each trip was a bit of a contortionist act. By the time I got the starboard winch off I came up with a better plan for port side; 4 pairs of locking pliers, one for each bolt, reducing the number of tight squeeze tricks to one.

I’ll fill the old holes, clean up the coaming, and site the new winches over the next couple of days.

The old Lewmars still have some life in them, so I’m going to service them and see if anyone wants to buy them. I don’t know how old they are, but they’ve been around a while. For their size their really well made and that English steel must be a fairly high grade as they still look pretty good. You can see from the picture of the coaming that the old winch and cleat have been on for a good long time.

The Andersen winches really are gorgeous. Sitting on the kitchen counter next to the Lewmar you can see the added heft of the Andersen winch, the larger drum will make a big difference when hauling in the 150 – I can’t wait to get them on the boat. Having the self-tailers is going to make a huge difference for me since I’m solo sailing a lot of the time. And the cockpit will be a little neater too, I never did like the placement of the cleat.

20080321_winches.jpg

2 thoughts on “New Winches for Madsu”

Comments are closed.